Eaton Power Conditioning

Eaton’s power conditioners provide exceptional system reliability through ultimate power protection against sags, surges, swells, spikes and electrical noise. The power conditioners correct voltage sags while maintaining uptime and productivity. They offer superior protection against damaging electrical disturbances. Eaton’s power conditioners safeguard critical equipment from all forms of RFI/EMI electrical noise.

Eaton Power-Sure 700

The Eaton Power-Sure 700 provides power protection using Eaton’s threephase power line conditioning system. Power-Sure 700 combines voltage regulation with a transformer and filter to remove transients and noise.

The Power-Sure 700 combines voltage regulation with a transformer and filter to remove transients and noise. The combined effect is regulating and shielded isolation transformer/system that solves 99 percent of the electrical disturbance problems, including electrical brownouts, sags, surges, transients and other electrical disturbances.

Processor controlled voltage regulation
Tight output voltage regulation
Zero-current switching
Wide input regulation range
Triple shielded, computer grade transformer
Highly efficient – 97 percent typical
High inrush capability
Transient protection and high frequency filter
Over/under voltage protection (optional)
Includes input circuit breaker
Manual bypass switch (optional)

Eaton EVR

Eaton’s electronic voltage regulator (EVR) is a three-phase microprocessor-controlled tap changing transformer that reduces equipment downtime and improve performance of critical equipment through constant voltage regulation and line noise reduction. It is the ideal solution for equipment or facilities experiencing brownouts and voltage regulation problems. The EVR’s patented design offers high in-rush current, rapid response and operating advantages over other manufacturers.

The EVR combines voltage regulation with a transformer and filter to remove transients and noise. The combined effect is regulating and shielded isolation transformer/system that solves 99 percent of the electrical disturbance problems, including electrical brownouts, sags, surges, transients and other electrical disturbances.

Processor controlled voltage regulation
Tight output voltage regulation
Zero-current switching
Wide input regulation range
Triple shielded, computer grade transformer
Highly efficient – 97 percent typical
High inrush capability
Transient protection and high frequency filter
Surge protection (optional)
Includes input circuit breaker
Manual bypass switch (Bypass is standard on 50 KVA and larger units and an option on 45 KVA and smaller units)
Standard and Premium Metering (optional)

Eaton Power-Sure 800

The Eaton Power-Sure 800 offers the solution for any application with noisy or poor power quality. Available in office, floor or wall/panel mounted industrial models.

The Power-Sure 800 power conditioners provide high quality power with inherent surge protection, noise and bi-directional harmonic filtering, as well as superior isolation. Ideal for industrial, commercial and medical equipment.

Superior isolation
Tight output voltage regulation
High immunity to distortion
Lightning and surge protection
Protection against power interruptions
Power factor correction
Bi-directional harmonic filtering
Meets ANSI standards for computers with inputs as low as 50 percent of nominal
UL 1012, UL 544 and cUL Listed
K-30 rated design

Eaton Power-Suppress 100

The Eaton Power-Suppress 100 Ultra-Isolation and Noise Suppressor provides protection against electrical disturbances and safeguards equipment from RFI/EMI electrical noise.

The Eaton Power-Suppress 100 Ultra-Isolator Noise Suppressors protect sensitive equipment against electrical noise disturbances. Using exclusive double shielding techniques, the Power Suppress 100 blocks all forms of electrical noise including RFI/EMI, over a broad range of frequencies.

Traps unwanted harmonics
Remove surge voltages and minimizes reflected THD
Eliminates load generated feedback
Available in both hardwired or line cord/receptacle models
Fast and easy installation
Long life operation
Small footprint – saves valuable space
Meets FCC Category A
UL 1012, cUL, UL 1449
Two-year, five-year warranty core & coil

Eaton Power-Suppress T7

The Eaton Power-Suppress T7 three-phase ultra-isolator noise suppressor protects electronic equipment against electrical noise disturbances while providing total isolation.

The Eaton Power-Suppress T7 ultra-isolator noise suppressor protects electronic equipment in data rooms, wiring cabinets and other sensitive equipment against electrical noise disturbances. These impediments, from sources such as lighting, utility network switching and the operation of electric motors, are the most prevalent and troublesome of all AC power disturbances.

20,000,000:1 (146 dB) Common-mode Noise Attenuation
Typically 1000 to 1 (60 dB) Normal-mode Noise Attenuation
Transient suppression system with status indicators
Exclusive shielding
K-13 rated
Overtemperature protection
Clean, noise-free power output
High efficiency
Fast, easy installation
UL and cUL listed requirements
Five-year warranty

Sag Ride Through (SRT) Power Conditioner

The EATON Sag Ride Through (SRT) power conditioner corrects sag events and phase shifts, responds within 1/8 of a cycle, and provides continuous voltage regulation.

Protect your plant from costly voltage sags by installing Eaton’s Sag Ride Through (SRT) device. The SRT is the first power conditioner to incorporate new technology that corrects voltage sags and maintains uptime and productivity. It requires no in-depth engineering study to select the appropriate model and no maintenance. Normally, a critical load profile and metering data review for site min/max load sag susceptibility is all that is required to select an SRT model.

Typically pays for itself in less than 1 year making it very cost-effective.
Continuous sag correction survives multiple sag events without re-charging capacitors for extra time savings.
98% efficiency ensures minimal operating costs.
Small design and footprint significantly reduces required floor space.
High overload capacity withstands downstream faults or high inrush currents for added safety.
Battery free design eliminates costly maintenance and disposal requirements.
No minimum load improves operating flexibility for fluctuating loads or processes.
Sub-cycle response patented circuit enables extremely fast 2 millisecond response (1/8 cycle).

Power Factor Correction

Eaton’s full line of Power Factor Correction capacitors and Harmonic Mitigation products include Capacitor Banks, Harmonic Filters, and Harmonic Correction Units, for Low and Medium Voltage Systems.

Capacitor and electronic means of Power Factor Correction provide well-known benefits to electric power systems. These benefits include power factor correction, poor power factor penalty utility bill reductions, voltage support, release of system capacity, and reduced system losses. A high power factor signals maximum use of electrical power, while a low power factor leads to purchasing more power to obtain the same load kW, which you pay for in various ways on your utility bill.

Product Styles:

LV-Unipump
LV-Unipak
LV-Unipak Filter
LV-AutoVAR 300
LV-AutoVAR 600
LV-AutoVAR Filter
LV-Transient-Free Static Switching
MV-UniVAR XV 2.4kV to 4.8 kV
MV-UniVAR MV 6.6 kV to 13.8 kV
MV-AutoVAR 2.4kV to 14.4kV

55,000+ Client Companies Have Chosen 42U

There’s a reason we’re the #1 choice of so many IT professionals.
Contact us and experience why.

Questions? Call us.

Call in and speak with one of our knowledgeable solutions engineers who will answer any questions you might have.

1-800-638-2638

Explore 42U Solutions

One of our data center solutions specialists will work together with you to find the optimal solution for your system.