Niagara Video Corporation IPTV Receivers

IPTV Receivers

IPTV Receivers are used to transmit content over IP networks. Receivers take in input from satellite, cable, local antenna content, and in-house created content, then send said content over IP networks for quick and easy sharing and viewing of content. Generally, IPTV Receivers take in a wide variety of inputs, turn around those signals and convert content into formats supported by pc players, media servers, and IP Set-Top Boxes.

SiliconDust US-2 Receiver

The Silicon Dust US-2 receiver is a single input product with two tuners that can support two channels. It can be wall-mounted if desired. With the StreaMaster receivers quickly turn around the incoming cable or terrestrial video. These receivers are cost-effective and feature-rich. They are the go-to solution for turning around incoming signals.

SiliconDust US-8 Receiver

The Silicon Dust US-8 Receiver makes life simple when there is a need to take local broadcast or cable channels and convert them to an IP format that can be distributed over a Local Area Network.

• UDP or RTP IP Streaming, unicast/multicast
• HTTP for remote streaming
• Supports PC players, Media Servers, and IP Set-Top Boxes
• RF Diagnostics (Signal Level/Quality)

SiliconDust US-16/16DT Receiver

The Silicon Dust US-16 Receiver makes life simple when there is a need to take local broadcast or cable channels and convert them to an IP format that can be distributed over a Local Area Network.

• UDP or RTP IP Streaming, unicast/multicast
• HTTP for remote streaming
• Supports PC players, Media Servers, and IP Set-Top Boxes
• RF Diagnostics (Signal Level/Quality)

SiliconDust DT2 Receiver

The Silicon Dust DT2 receiver is a single input product with two tuners that can support two channels. It can be wall-mounted if desired. With the StreaMaster receivers quickly turn around the incoming cable or terrestrial video. These receivers are cost-effective and feature-rich. They are the go-to solution for turning around incoming signals.

SiliconDust DT8 Receiver

The SiliconDust DT8 receiver takes in up to four DVB-T inputs and 4 ethernet connections and outputs a unicast or multicast UDP or RTP output per each channel desired for local streaming and now HTTP for remote streaming! Each input has two tuners so each system can support up to 8 channels.

• Small Form Factor
• Low power consumption
• SDI, HDMI, Component, Composite, VGA, and DVI Inputs
• Front Panel Controls
• Multiple Outputs; Transport Stream (UDP/RTP), Adobe Flash ( up to 4 RTMP streams), RTSP (with ONVIF support)
• Save to file while streaming

SiliconDust CC-6 Receiver

The SiliconDust CC-6 receiver takes in up to two physical QAM RF inputs and outputs a unicast or multicast UDP or RTP output per each channel desired. Each input has three tuners so each system can support up to 6 channels.

• UDP or RTP IP Streaming, unicast/multicast
• HTTP for remote streaming
• Supports PC players, Media Servers, and IP Set-Top Boxes
• RF Diagnostics (Signal Level/Quality)

SiliconDust 36CC Receiver

The SiliconDust 36CC receiver has 6 US Cable Card inputs and 6 Ethernet Connections and outputs a unicast or multicast UDP or RTP output per each channel desired for local streaming and now HTTP for remote streaming! Each input has two tuners so each system can support up to 36 channels.

• TV Broadcasters
• Government
• Enterprise
• Education
• TV Distribution over a LAN
• Off-air or Head-end Monitoring
• Digital Signage